An Equipment for Directly Cleaning Out Fuel Injectors of Internal Combustion Engine

Nguyen Huu Huong; Nguyen Huynh Minh; Nguyen Le Duy Khai

doi:doi:10.11648/j.ijmea.s.2015030301.11

| Peer-Reviewed

An Equipment for Directly Cleaning Out Fuel Injectors of Internal Combustion Engine

Nguyen Huu Huong, Nguyen Huynh Minh, Nguyen Le Duy Khai

Published in International Journal of Mechanical Engineering and Applications (Volume 3, Issue 3-1)

Received: 25 November 2014 Accepted: 16 January 2015 Published: 14 February 2015

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

This paper presents the results of research, design, and manufacture a new equipment for directly cleaning out fuel injectors of internal combustion engine which can be used on electronic fuel injection of gasoline engines. The equipment combined with new proposed cleaning solution will shorten engine maintenance time without disassembling the injectors out of the engines, and no need to use brackets (no need to disassemble the injectors out of the engine). The equipment operates safely and accurately, providing a very high efficiency. This new device is firstly manufactured in Vietnam, incorporates resent new advanced technologies in electrical - electronic engineering and information technology, contributes to reduce pollution emissions, and can be applied to EURO 2 standard gasoline and diesel engines mounted on passenger cars. The research results can be applied immediately in manufacture with low cost, suit domestic technological capabilities, reduce maintenance time of fuel injection system for internal combustion engine.

Published in	International Journal of Mechanical Engineering and Applications (Volume 3, Issue 3-1) This article belongs to the Special Issue Transportation Engineering Technology — Part Ⅱ
DOI	10.11648/j.ijmea.s.2015030301.11
Page(s)	1-6
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2015. Published by Science Publishing Group

Keywords

Direct Cleaning Equipment, Fuel Injectors, Internal Combustion Engines

References

[1]	Nguyen Tat Tien, Theory of Internal Combustion Engine, (Nguyên lý động cơ đốt trong), NXBGD -Ha noi, 2000.
[2]	Do Van Dung – Electrical equipment and Electronic control on modern automobiles (Trang bị điện và điều khiển điện tử trên ô tô hiện đại), VNU-HCM Pub. 2004.
[3]	Do Van Dung – Electrical equipment and Electronic Engine control on modern vehicles (Điện động cơ và điều khiển động cơ trên ô tô hiện đại), VNU-HCM Pub. 2013.
[4]	Bui Van Ga, Van Thi Bong, Pham Xuan Mai, Tran Van Nam – Vehicles and air pollution (Ô tô và ô nhiễm môi trường). NXBGD -Ha noi, 2005.
[5]	J. Warnaer, U. Maas and R. W Dibble, Combustion. Springer - Verlag Berlin heidelberg 2006, 4th Editon.
[6]	Tom Danton, Automobile Electrical and Electronic Systems, Cataloguing in Publicating Data, British Library, 3rd Editon 2004.

Cite This Article

Plain Text BibTeX RIS

APA Style

Nguyen Huu Huong, Nguyen Huynh Minh, Nguyen Le Duy Khai. (2015). An Equipment for Directly Cleaning Out Fuel Injectors of Internal Combustion Engine. International Journal of Mechanical Engineering and Applications, 3(3-1), 1-6. https://doi.org/10.11648/j.ijmea.s.2015030301.11

Copy | Download

ACS Style

Nguyen Huu Huong; Nguyen Huynh Minh; Nguyen Le Duy Khai. An Equipment for Directly Cleaning Out Fuel Injectors of Internal Combustion Engine. Int. J. Mech. Eng. Appl. 2015, 3(3-1), 1-6. doi: 10.11648/j.ijmea.s.2015030301.11

Copy | Download

AMA Style

Nguyen Huu Huong, Nguyen Huynh Minh, Nguyen Le Duy Khai. An Equipment for Directly Cleaning Out Fuel Injectors of Internal Combustion Engine. Int J Mech Eng Appl. 2015;3(3-1):1-6. doi: 10.11648/j.ijmea.s.2015030301.11

Copy | Download

@article{10.11648/j.ijmea.s.2015030301.11,
  author = {Nguyen Huu Huong and Nguyen Huynh Minh and Nguyen Le Duy Khai},
  title = {An Equipment for Directly Cleaning Out Fuel Injectors of Internal Combustion Engine},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {3},
  number = {3-1},
  pages = {1-6},
  doi = {10.11648/j.ijmea.s.2015030301.11},
  url = {https://doi.org/10.11648/j.ijmea.s.2015030301.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.s.2015030301.11},
  abstract = {This paper presents the results of research, design, and manufacture a new equipment for directly cleaning out fuel injectors of internal combustion engine which can be used on electronic fuel injection of gasoline engines. The equipment combined with new proposed cleaning solution will shorten engine maintenance time without disassembling the injectors out of the engines, and no need to use brackets (no need to disassemble the injectors out of the engine). The equipment operates safely and accurately, providing a very high efficiency. This new device is firstly manufactured in Vietnam, incorporates resent new advanced technologies in electrical - electronic engineering and information technology, contributes to reduce pollution emissions, and can be applied to EURO 2 standard gasoline and diesel engines mounted on passenger cars. The research results can be applied immediately in manufacture with low cost, suit domestic technological capabilities, reduce maintenance time of fuel injection system for internal combustion engine.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - An Equipment for Directly Cleaning Out Fuel Injectors of Internal Combustion Engine
AU  - Nguyen Huu Huong
AU  - Nguyen Huynh Minh
AU  - Nguyen Le Duy Khai
Y1  - 2015/02/14
PY  - 2015
N1  - https://doi.org/10.11648/j.ijmea.s.2015030301.11
DO  - 10.11648/j.ijmea.s.2015030301.11
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 1
EP  - 6
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.s.2015030301.11
AB  - This paper presents the results of research, design, and manufacture a new equipment for directly cleaning out fuel injectors of internal combustion engine which can be used on electronic fuel injection of gasoline engines. The equipment combined with new proposed cleaning solution will shorten engine maintenance time without disassembling the injectors out of the engines, and no need to use brackets (no need to disassemble the injectors out of the engine). The equipment operates safely and accurately, providing a very high efficiency. This new device is firstly manufactured in Vietnam, incorporates resent new advanced technologies in electrical - electronic engineering and information technology, contributes to reduce pollution emissions, and can be applied to EURO 2 standard gasoline and diesel engines mounted on passenger cars. The research results can be applied immediately in manufacture with low cost, suit domestic technological capabilities, reduce maintenance time of fuel injection system for internal combustion engine.
VL  - 3
IS  - 3-1
ER  -

Copy | Download

Author Information

Nguyen Huu Huong

Faculty of Transportation Engineering, Ho Chi Minh City University of Technology, Ho Chi Minh city, Vietnam
Nguyen Huynh Minh

Faculty of Mechanical & Vehicle Engineering, Ninh Thuan Technical College, Ninh Thuan, Vietnam
Nguyen Le Duy Khai

Faculty of Transportation Engineering, Ho Chi Minh City University of Technology, Ho Chi Minh city, Vietnam

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Nguyen Huu Huong, Nguyen Huynh Minh, Nguyen Le Duy Khai. (2015). An Equipment for Directly Cleaning Out Fuel Injectors of Internal Combustion Engine. International Journal of Mechanical Engineering and Applications, 3(3-1), 1-6. https://doi.org/10.11648/j.ijmea.s.2015030301.11

Copy | Download

ACS Style

Nguyen Huu Huong; Nguyen Huynh Minh; Nguyen Le Duy Khai. An Equipment for Directly Cleaning Out Fuel Injectors of Internal Combustion Engine. Int. J. Mech. Eng. Appl. 2015, 3(3-1), 1-6. doi: 10.11648/j.ijmea.s.2015030301.11

Copy | Download

AMA Style

Nguyen Huu Huong, Nguyen Huynh Minh, Nguyen Le Duy Khai. An Equipment for Directly Cleaning Out Fuel Injectors of Internal Combustion Engine. Int J Mech Eng Appl. 2015;3(3-1):1-6. doi: 10.11648/j.ijmea.s.2015030301.11

Copy | Download

@article{10.11648/j.ijmea.s.2015030301.11,
  author = {Nguyen Huu Huong and Nguyen Huynh Minh and Nguyen Le Duy Khai},
  title = {An Equipment for Directly Cleaning Out Fuel Injectors of Internal Combustion Engine},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {3},
  number = {3-1},
  pages = {1-6},
  doi = {10.11648/j.ijmea.s.2015030301.11},
  url = {https://doi.org/10.11648/j.ijmea.s.2015030301.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.s.2015030301.11},
  abstract = {This paper presents the results of research, design, and manufacture a new equipment for directly cleaning out fuel injectors of internal combustion engine which can be used on electronic fuel injection of gasoline engines. The equipment combined with new proposed cleaning solution will shorten engine maintenance time without disassembling the injectors out of the engines, and no need to use brackets (no need to disassemble the injectors out of the engine). The equipment operates safely and accurately, providing a very high efficiency. This new device is firstly manufactured in Vietnam, incorporates resent new advanced technologies in electrical - electronic engineering and information technology, contributes to reduce pollution emissions, and can be applied to EURO 2 standard gasoline and diesel engines mounted on passenger cars. The research results can be applied immediately in manufacture with low cost, suit domestic technological capabilities, reduce maintenance time of fuel injection system for internal combustion engine.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - An Equipment for Directly Cleaning Out Fuel Injectors of Internal Combustion Engine
AU  - Nguyen Huu Huong
AU  - Nguyen Huynh Minh
AU  - Nguyen Le Duy Khai
Y1  - 2015/02/14
PY  - 2015
N1  - https://doi.org/10.11648/j.ijmea.s.2015030301.11
DO  - 10.11648/j.ijmea.s.2015030301.11
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 1
EP  - 6
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.s.2015030301.11
AB  - This paper presents the results of research, design, and manufacture a new equipment for directly cleaning out fuel injectors of internal combustion engine which can be used on electronic fuel injection of gasoline engines. The equipment combined with new proposed cleaning solution will shorten engine maintenance time without disassembling the injectors out of the engines, and no need to use brackets (no need to disassemble the injectors out of the engine). The equipment operates safely and accurately, providing a very high efficiency. This new device is firstly manufactured in Vietnam, incorporates resent new advanced technologies in electrical - electronic engineering and information technology, contributes to reduce pollution emissions, and can be applied to EURO 2 standard gasoline and diesel engines mounted on passenger cars. The research results can be applied immediately in manufacture with low cost, suit domestic technological capabilities, reduce maintenance time of fuel injection system for internal combustion engine.
VL  - 3
IS  - 3-1
ER  -

Copy | Download